Archive for 2014

How to Extend a Forklift Battery’s Life

Using batteries for forklift operation offers a significant financial benefit, but improperly caring for the batteries can greatly reduce monetary gain. To maximize the effectiveness of forklift batteries, it is crucial to develop a regular maintenance routine. With proper care, they can last for many years – approximately 24,000 working hours – and save you lots of money.

Proper Maintenance for Forklift Batteries

After obtaining a battery for a forklift, take the following steps to ensure that your battery is well-cared for:

  • Clean regularly. Cleaning forklift batteries is an important step towards lengthening their lifespan. Use water and battery acid neutralizer to clean the battery as well as any spills that may occur.
  • Schedule times to work and times to recharge. Avoid running out of battery during a project by carefully scheduling times for the battery to recharge.
  • Check water levels. Since water is a vital part of the battery’s functionality, make sure to refill the battery’s water supply regularly. It will require more water every 5 to 10 charges. Be careful not to overfill, and always water check levels after charging.
  • Inspect forsulphation daily. When white sulphuric crystals appear on the battery’s lead plates, it is less able to hold a charge effectively. Visually inspect forklift batteries daily to make sure sulphation has not begun.
  • Check for exposed plugs and wires. Before use, perform a visual inspection of all plugs and wires to ensure they are not exposed or damaged.


Avoid These Mistakes

Even if you are careful to follow all the guidelines for proper forklift battery maintenance, some mistakes can still be costly. The following problems may lead to dangerous accidents that could severely damage the battery or harm employees.

  • Don’t remove the battery before turning off the charger. Take the time to turn off the charger to avoid damaging the battery.
  • Don’t use a battery that is less than 20% charged. When a battery is not sufficiently charged, it runs hot, which can harm both the battery and the engine that it is powering.
  • Don’t let it die. Once forklift batteries die, they often require as long as three days to recharge. Even worse, allowing a battery to die while operating a forklift can wreak havoc on its electronics.

By heeding these suggestions, you can greatly extend the life of your forklift batteries. A longer battery lifespan means you save even more money!

Industrial Powersource offers a cost effective PLATINUM CARE plan that allows you to avoid costly downtime, avoid OSHA & EPA penalties and substantially decrease your labor costs.  Call 562-239-2928 today speak with one of our experienced technicians!

Posted in: Battery Knowledge, Forklift Batteries

Leave a Comment (0) →

Three Reasons Why You Need PLATINUM CARE Today

Many things can go wrong with your batteries and chargers without proper maintenance.  Here are three very important reasons why PLATINUM CARE will help your business succeed:

  1. AVOID COSTLY DOWNTIME – IPS knows that batteries are the force behind your productivity and loss of production time results in less profit.  With our PLATINUM CARE plan, you will never have to worry about down time.
  2. AVOID OSHA & EPA PENALTIES – Running an operation that is OSHA & EPA compliant takes a lot of attention to detail.  Noncompliance can cause a stream of problems and expensive penalty fees. Industrial Powersource can eliminate all concerns related to your batteries and chargers, allowing you to focus on what you do best.
  3. DECREASE LABOR EXPENSES– Hiring and training staff to maintain your batteries and chargers is a large expense. Why pay the additional costs of having an employee when you can get an experienced technician to service, maintain and take exceptional care of your equipment for a fraction of the cost?


This affordable preventative service plan will reduce your maintenance expenses by providing the following benefits:

  • Maintain an Accurate Inventory of Every Battery
  • Water All Batteries as Needed
  • Clean and Neutralize Acid from Batteries
  • Clean and Maintain Battery Rooms
  • Visual Inspection of ALL Components
  • Replacement of Misc Damaged Parts
  • Provide Monthly Detailed Reports via Email
  • Clean and Inspect all Chargers

****We also offer battery room cleanup with our mobile washing station****



Posted in: Battery Knowledge, Commercial Batteries, Deep Cycle Batteries, Forklift Batteries, Heavy Duty Batteries, Industrial Batteries, Industrial Chargers

Leave a Comment (0) →

5 Ways Crown Battery Helps Protect the Environment

Choosing industrial batteries for business or personal use can be a tough decision. With so many battery suppliers, specs, models, and uses, how do you make a choice? When choosing a battery, it’s important to think about your needs and goals. Are you trying to maximize productivity? Are you trying to reduce cost? Is your company going “green”?

Crown battery is known for its superior quality, top notch construction, and longevity. What it’s a little less known for is its commitment to the environment. As recently featured on ABC, Crown is dedicated to responsible environmental practices and works toward powering the future with alternative, renewable energies. Crown industrial batteries and commercial batteries are a breath of fresh air for businesses who want to limit their environmental footprint. Let’s take a look at some astounding facts.

Crown Recycles

Recently, Crown was featured on ABC for creating top notch industrial batteries and committing to the provision of power to undeserved areas of the world. As seen on this special feature, Crown is dedicated to the practice of recycling. Nearly 100% of recycled batteries are funneled back into the manufacturing process. Additionally, Crown makes reconditioned batteries available to consumers who seek quality with a lower price tag.

Crown Uses Wind Energy

As a company, Crown is committed to protecting the environment through 100% compliance with environmental regulations. But, Crown’s desire to improve the environment doesn’t end there. Crown is home to the Wind Cube, a revolutionary device that uses wind velocity to increase kilowatt-hours. By using devices, such as the Wind Cube, Crown is able to harness the power of renewable energy while minimizing its environmental footprint.

Crown Powers Alternative Energy Systems

Not only does Crown use renewable energy to power its manufacturing process, but it also creates industrial batteries and commercial batteries specifically designed for use by alternative energy sources. For example, Crown recently developed batteries for compatibility with wind and solar power systems, providing environmentally conscious customers with a viable way to maximize the availability of a renewable energy source.

Crown Creates Energy Efficient Batteries

In addition to the steps Crown takes to protect the environment, Crown has perfected the art of the energy efficient battery. Crown industrial batteries are designed to save energy, preserve resources, and reduce energy costs. Each Crown battery is created to perform optimally while relieving some of the burden of high energy costs.

Crown Helps Protect Air & Water

Because Crown is committed to protecting the environment, the company works diligently to protect air and water through responsible manufacturing, recycling, distribution, and disposal practices. The professionals at Crown strive to make industrial batteries that provide customers with excellent value and performance while protecting the world around us.

Are You Interested in Crown Batteries for Your Business?

Crown industrial batteries and commercial batteries are easy to use, durable, long lasting, and powerful. As a bonus, you can feel good about purchasing a Crown battery as the company is dedicated to protecting the environment. For further information about Crown batteries, contact Industrial Powersource today.

Posted in: Battery Knowledge

Leave a Comment (0) →
Page 2 of 2 12